This converts all the YAML files to JSON files, as json parsing is built
into python instead of being a separate library requiring installation.
YAML is a superset of JSON, but putting comments in is not quite as obvious
as it is in yaml.
The following glue was used to convert yaml to json:
python -c 'import sys, yaml, json; json.dump(yaml.load(sys.stdin), sys.stdout, indent=4)' < $1 > $2
Clearly I haven't tested this on every single platform, and this
doesn't address the large blobs of yaml in the lpc4300 scripts directory,
only the cortex NVIC generation process.
I've tested a few IRQ driven example apps, and I've checked the generated
output of some known cases like the LM3s that has explicit gaps, and they are
all generated correctly.
According to RM0090, page 301, paragraph 11.13.12 Note. (For F4, for F1 and F3 is it in the corresponding manuals)
The JSQR are filled always ending at SQR4 ie for those lists we must set this list:
(A) -> JSQ4 = A,
(A,B) -> JSQ3 = A, JSQ4 = B,
(A,B,C) -> JSQ2 = A, JSQ3 = B, JSQ4 = C,
(A,B,C,D) -> JSQ1 = A, JSQ2 = B, JSQ3 = C, JSQ4 = D,
The readed values are in correct order, starting from JDR1:
(A) -> JDR1 = A,
(A,B) -> JDR1 = A, JDR2 = B,
(A,B,C) -> JDR1 = A, JDR2 = B, JDR3 = C,
(A,B,C,D) -> JDR1 = A, JDR2 = B, JDR3 = C, JDR4 = D,
DFF exists at bit 11 for f1, f2, f4 and l1, but the f0 and f3 have that bit as
CRC len and use CR2 for data size bits instead. The merging of the F3 and F0
and attempts to put common data in common places broke the l1 code.
F3 and F0 SPI headers are still almost completely identical.
STM32L1 has a different set of offsets, not just a different base
address, so we can't have common registers definitions. Also, out of
F0,F1,F2,F3,F4,L1, only the F1 has the odd note about 2x16bit registers
and 2x32bit registers with one 16bit register marked as "This field
value is also reserved for a future feature." Therefore, replace the
awkward reading out as multiple words and just copy them in.
F0,F2,F3,F4 were missing definitions altogether.
This does _not_ attempt to address the problem of the mismatched base
addresses for Medium+ and High Density L1 parts.
We don't support f0 yet so let's not fool anyone. We may rename those
files back again if when we cross check that it is actually true this
file supports f0.
In places where we were defining memory mapped peripheral buffers we
were using directly a cast to "volatile int_type *". For consistency we
should use dereferenced accessor like: &MMIO32(address)
Added --terse and --mailback options to the make stylecheck target. It
also does continue even if it enounters a possible error.
We decided on two exceptions from the linux kernel coding standard:
- Empty wait while loops may end with ; on the same line.
- All blocks after while, if, for have to be in brackets even if they
only contain one statement. Otherwise it is easy to introduce an
error.
Checkpatch needs to be adapted to reflect those changes.
f1/timer.
Added timer_ic_set_polarity to timer_common_f24 with
the enum tim_ic_pol now including trigger on both edges.
Changed timer_slave_set_polarity to use enum tim_et_pol
rather than tim_ic_pol.
In response to suggestion of stinkydiver73 on 24 March that
timers in all families have an option for triggers on both
edges, except F1.
F2 and F4 have a common section to deal with the options register (TIM2 and TIM5 only)
L1 has been made common with timer_common_all as its options register has very different settings to F2/F4. Code is in the L1/timer.c L1/timer.h files
Note that F3 and F05 timers should fit into this scheme, with F3 having additional features.
Bundled with this is L1/pwr.h to change a documentation setting
Also all the Doxyfiles have added "ENABLE_PREPROCESSING = NO" to fix a problem introduced by commit 118.
to remove errors, duplications and inconsistencies.
File lib/stm32/f1/pwr.c - all code removed as it duplicates that in common/pwr_common.c
Remaining changes do not affect code. Compiles OK.
TODO efm32 has no code so generates no modules
TODO F2 needs pwr.c
TODO L1 needs dma.h and dma.c
Most peripheral headers simply include <libopencm3/stm32/memorymap.h>
which, like the rest of libopencm3 requires the correct compiler define
flag to be set. A few peripherals were directly including the platform
include, libopencm3/stm32/xx/memorymap.h, and in some of those cases it
wasn't even correctly including the correct platform. (Likely the
result of copy/paste errors)
These direct includes have been eliminated
Add the register definitions and some of the most basic helper functions
for the new style BCD RTC module found on the F2, F4, L1, F3 and F0.
This tries to keep as close to HACKING_COMMON_DOC as possible, while
maintaining sane names.
Code added for L1 to support the PWR Control block didn't properly
follow the HACKING_COMMON_DOC guidelines. The naming was wrong, and
some headers were missing. This commit has no functional changes, it
only addresses the style and structure problems.
Updated the documentation so that it appears in all families
Also added it to the L1 area, but is untested. An addition to the memorymap
allows commonality and a #ifdef added to the spi_common_all code to
exclude the case of SPI3 for L1 and F0 as SPI3 doesn't exist in those.
An rcc dispatch header was added to remove same code from the spi header.
