F09x and L4 share the same cselr register, as well as some L0s, factorize
definitions in a new shared header and add helpers.
fyi, that register allows to redefine dma channel peripheral mapping - see
device datasheet for mapping tables.
Regular rng peripheral, with one additional bit : clock error detection
apparently available on l4 chips). Curiously, Clock error detection is
_disabled_ when bit is set, but bit is cleared by default, so peripheral
/ clock error detection behaves like all other chips..
NB: RNG need proper rcc_ccicr_rngsel bits set to work, no clock is set by
default. Note also that on that chip fRNGCLK must be higher than fHCLK/32
You can't have two mainpage items, and the second was just being
ignored. This restores them, which makes the left side list longer,
which we may or may not like, but it's at least how it was documented to
be.
The internal stack has a hard internal limit of 8, which is as many as
all supported devices support, but not as flexible as the arbitrary
addressing that USB actually allows.
At _least_ document this.
Fixes: https://github.com/libopencm3/libopencm3/issues/666
* Include the doc-swm050.h core file that defines the base groups.
* Fix/tweak groupings to make things consistent with other targets.
* Drop redundant type information. That's all included from the function
signatures automatically by doxygen.
* Added register descriptions from datasheet.
SWM050 is a series of MCU made by Foshan Synwit Tech. It contains a
Cortex-M0 CPU core, 8KiB of Flash and 1KiB of SRAM. The only peripherals
are GPIO, Timer and WDT. There's only two parts in this series, with
either TSSOP-8 or SSOP-16 packages.
This commit introduces the interrupt vector and GPIO support for them.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
This clock is the USB High Frequency PLL that gets trimmed based
on clock recovery. It is the most accurate PLL on the system,
assuming it is connected via USB.
Add the definition of this clock in preparation for being able
to switch to it.
Signed-off-by: Sean Cross <sean@xobs.io>
According to RM0351 and RM0394 flash needs to be programmed by double words.
Also fix flash_program() which was wrong anyways.
Reviewed-by: Karl Palsson <karlp@tweak.net.au>
48Mhz has no purpose other than to be a naiive method of haivng working
USB. 120MHz never had any purpose, other than to match the f2 code it
was copied from. Drop them both. Remaining configs are all max speeds
for various F4 parts. Lower speeds are all custom
