On linux, the output of CP rule was try to write to / which is - of course, forbidden for write.
This solution adds to each part of lib correct pointer to the root of lib where the libs should be written.
Bug found by Kuldeep Singh Dhaka.
Extension of code for STM32F1 to allow for dual bank series XL.
Small changes to documentation for F2, F4 and L1 to add a parameter reference.
Tested with STM32F103RBT6
(note: tests show that the PG bit must be cleared after programming, otherwise
a subsequent erase attempt fails. This has been added to flash_program_half_word
for F0 and F1 only. A fix for the other families is not included in this PR.)
This unifies stm32f1, l1, and f4 convenience functions for adc. The code
should be useable for f2 and f37x as well, but that needs hardware for testing,
and there was no existing implementation. This is the reason for the
"adc_common_v1.c" name, as trying to put all the different families into the
common file name has become too cumbersome.
All of the deprecated routines have been dropped, they've been marked
deprecated for a very long time now, and porting them seemed unnecessary.
This has been tested on f1, l1 and f4 discovery boards, and is based on some
existing l1/f1 unification code from
https://github.com/karlp/libopencm3/tree/rme_l1_master
So that the navigation pane works correctly in browsers.
Some additional doc fixes put in where found (but many more still to go).
Added some dummy .c and .h files to bring the associated docs into line.
makefile changed to allow 'make html' as well as 'make doc' (the latter only does html anyway).
According to RM0090, page 301, paragraph 11.13.12 Note. (For F4, for F1 and F3 is it in the corresponding manuals)
The JSQR are filled always ending at SQR4 ie for those lists we must set this list:
(A) -> JSQ4 = A,
(A,B) -> JSQ3 = A, JSQ4 = B,
(A,B,C) -> JSQ2 = A, JSQ3 = B, JSQ4 = C,
(A,B,C,D) -> JSQ1 = A, JSQ2 = B, JSQ3 = C, JSQ4 = D,
The readed values are in correct order, starting from JDR1:
(A) -> JDR1 = A,
(A,B) -> JDR1 = A, JDR2 = B,
(A,B,C) -> JDR1 = A, JDR2 = B, JDR3 = C,
(A,B,C,D) -> JDR1 = A, JDR2 = B, JDR3 = C, JDR4 = D,
The common code wasn't being included in L1 builds, even though the headers now
included the correct definitions.
This combines the two f0 and f3 spi files, which previously differed only in
the number of spi peripherals defined.
Files were renamed to the full "l1f124" style, not because I like it, but
because it's the convention we have, so it's best to apply it rigourously.
Tested on L1 and F100 boards, compile tested only for others, but the examples
repository all compiles too. (Though the lack of SPI examples for all
platforms was how this broke in the first place)
We currently default to "-mfloat-abi=hard -mfpu=fpv4-sp-d16" for M4F cores, and
and variations of "-mfloat-abi=soft" for the others. Keep the M4F default, and
move others to no FP flags for consistency, but allow overriding these flags
via the FP_FLAGS environment variable.
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Because most changes are internal to a function in exti.c I am leaving
the macro checks in there, otherwise we would end up with a bunch of
code duplication if we used the dispatch system used otherwise
throughout the stm32 part of the library. I bet it could be split up
into more granular functions resulting in more generic code that we
could run through the dispatch system. But I am leaving that as an
excersize for later.
We don't support f0 yet so let's not fool anyone. We may rename those
files back again if when we cross check that it is actually true this
file supports f0.
In places where we were defining memory mapped peripheral buffers we
were using directly a cast to "volatile int_type *". For consistency we
should use dereferenced accessor like: &MMIO32(address)
Added --terse and --mailback options to the make stylecheck target. It
also does continue even if it enounters a possible error.
We decided on two exceptions from the linux kernel coding standard:
- Empty wait while loops may end with ; on the same line.
- All blocks after while, if, for have to be in brackets even if they
only contain one statement. Otherwise it is easy to introduce an
error.
Checkpatch needs to be adapted to reflect those changes.
f1/timer.
Added timer_ic_set_polarity to timer_common_f24 with
the enum tim_ic_pol now including trigger on both edges.
Changed timer_slave_set_polarity to use enum tim_et_pol
rather than tim_ic_pol.
In response to suggestion of stinkydiver73 on 24 March that
timers in all families have an option for triggers on both
edges, except F1.
F2 and F4 have a common section to deal with the options register (TIM2 and TIM5 only)
L1 has been made common with timer_common_all as its options register has very different settings to F2/F4. Code is in the L1/timer.c L1/timer.h files
Note that F3 and F05 timers should fit into this scheme, with F3 having additional features.
Bundled with this is L1/pwr.h to change a documentation setting
Also all the Doxyfiles have added "ENABLE_PREPROCESSING = NO" to fix a problem introduced by commit 118.
(prevents inclusion and also issues warning)
Changes to some source files to remove references to common headers.
Changes to rng.h to make guard symbols the same in f2 and f4.
to remove errors, duplications and inconsistencies.
File lib/stm32/f1/pwr.c - all code removed as it duplicates that in common/pwr_common.c
Remaining changes do not affect code. Compiles OK.
TODO efm32 has no code so generates no modules
TODO F2 needs pwr.c
TODO L1 needs dma.h and dma.c
Code added for L1 to support the PWR Control block didn't properly
follow the HACKING_COMMON_DOC guidelines. The naming was wrong, and
some headers were missing. This commit has no functional changes, it
only addresses the style and structure problems.
Updated the documentation so that it appears in all families
Also added it to the L1 area, but is untested. An addition to the memorymap
allows commonality and a #ifdef added to the spi_common_all code to
exclude the case of SPI3 for L1 and F0 as SPI3 doesn't exist in those.
An rcc dispatch header was added to remove same code from the spi header.
