The f0, f30x and l0 have a very similar "v2" adc peripheral.
Start extracting out some of the common code, and fix the glaring bug in
adc_power_down that was affecting them both.
This is not intended to be a fully comprehensive extraction, just the first
easy steps.
The adc peripheral on F30x is the same as F0, L0 and L4. In the reference
manuals, the following names are used.
F3: CFGR (no CFGR2)
F0 and L0: CFGR1 and CFGR2
L4: CFGR and CFGR2
Moving to a single consistent name, that's more likely to be inline with future
part numbers makes it much easier to extract common driver code for the
peripheral.
While all bit defines are moved to the CFGR1 style, core register definitions:
ADC_CFGR(adc) and ADCx_CFGR are kept to match the original register name in the
reference manual.
Fixes Github issue #548
All defined bits are rc_w0.
The paranoid version of this would write 0 to the reserved bits (0 is the
"reset value"), but this would require knowing which flags are valid on the
actual platform, and adding the corresponding macros.
Connectivity line devices have more remaps available, and the existing code was
artificially and needlessly preventing those remaps from being set, even if
defined.
While implementing this, the existing code to handle SWJ remap was found to be
inconsistent with the reference manual and has been fixed.
Fixes github issue #369
DESIG_FLASH_SIZE is provided for all stm32 parts in desig.h, correctly defined
as 16bits. Remove the incorrect duplicate definition within the f1 flash
handling code.
Fixes github issues #621
Recent debian testing and ubuntu 15.10 releases contain a
gcc-arm-none-eabi toolchain that returns 0 for the test with -mcpu and
-fsyntax-only, despite not actually supporting cortex-m7. They then
failed hard on actual compilation steps.
Use the --help=target output instead. tested with old g-a-e 4.7 and
newer releases.
As done by esden for the F4, remove typedefs and add prefixes to clock enums
This extends this to all stm32 families.
Let's not hide the fact that these variables are structs/enums.
We are filling up the namespace badly enough, we should be prefixing as
much as we can with the module names at least. As users we already run
often enough in namespace colisions we don't have to make it worse.
* CLOCK_3V3_xxx enums renamed to RCC_CLOCK_3V3_xxx
* clock enums (PLL, HSI, HSE ...) prefixed with RCC_
* scale enum of pwr module prefixed with PWR_
Let's not hide the fact that these variables are structs/enums.
We are filling up the namespace badly enough, we should be prefixing as
much as we can with the module names at least. As users we already run
often enough in namespace colisions we don't have to make it worse.
* CLOCK_3V3_xxx enums renamed to RCC_CLOCK_3V3_xxx
* clock enums (PLL, HSI, HSE ...) prefixed with RCC_
* scale enum of pwr module prefixed with PWR_
These prototypes affect functions defined by application code. Only
the implementations in libopencm3 are supposed to be weak; the
functions in application code should definitely not be. Otherwise,
you'll end up with two weak symbols being linked together, and
it's luck as to which one the linker picks.
Just the basic core common functionality gained for free by being a common
peripheral. Enough for a miniblink.
Fixes some errors in the GPIO memory map. ST's naming of AHB2 vs AHB3 is
confusing.
Values from RM0351rev1, with the correction of the duplicate TIM1_CC entry.
Only stub support so far, but this opens up the beginning of build testing.
After adding support to the f3, add missing doxygen support to the f0
equivalent. This improves things and keeps them consistent until/if they are
pulled out as common code.
Based on the f0 support, which has identical functionality, but with doxygen
added. Bits renamed as they are only HSE prediv on some targets, and makes
things more consistent with the f0.
Fixes part of github issue #560
This function was badly copied and pasted from the f4 library, where there are
two functions, rcc_set_main_pll_hsi and rcc_set_main_pll_hse which combine
source, multipliers, dividers and other pll factors.
On F3, (not all of them, but the ones we support now), the function as
implemented has nothing to do with hsi / hse, and instead is simply selecting
the PLL multiplier.
Copypasta from f4 rcc code was only modified to shift the result, but not clear
the existing settings properly. Add mask/shift definitions and use them
properly.
The filename has always been wrong, "6" is a temperature grade, but f405 and
f407 are in the same datasheet, and all have the 64k CCM. Add it to the linker
script.
Was only in the (obviously out of date) documented example and as a
declaration. No implementations. Dropping immediately, but documentation
still needs further work.
Most changes are noise from doxygen.
Readme udpated to explain newer FP_FLAGS for m7
stm32f7 library is skipped if the toolchain doesn't support it yet.
Renamed every instance of variable CFLAGS in target specific Makefiles
to TGT_CFLAGS to free up CFLAGS for user defined compiler flags.
Added information in README.md about existence and usage of CFLAGS
environment variable in build process.
