- add brief descriptions for HSI clock functions
- use rcc_set_pll_source to set PLL source in RCC_CFGR
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Early revisions of the reference manuals used different names for the
touch sense controller and firewall bits. These have now been changed
to be more in line with other families, and as these parts and bits were
new in this library, simply move forward to the current naming
convention.
According to reference manuals both l0 and l4 have "v2" i2c peripheral.
This patch adds i2c support to l0 and l4 using previously unified "v2" i2c
headers and implementation.
No real hardware has been tested so far. Only compilation tests for both
libopencm3 and libopencm3-examples for all stm32 families.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
The f1, f2, f4, l1 chip families have a similar "v1" i2c peripheral on board.
More recent f0, f3, l0, l3 chip families share another "v2" version of i2c.
This patch unifies headers and implementation for two types of i2c peripherals:
- rename: i2c_common_all.[ch] to i2c_common_v1.[ch]
- remove i2c_common_f24.h: extra I2C blocks are defined in specific headers
- use f3 i2c code as a basis for common "v2" i2c implementation
- add f0 i2c support: use "v2" i2c implementation
Tests:
- tested on a custom f0 board
- compile-tested both libopencm3 and libopencm3-examples for all stm32
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Add three more RTC clock helper functions:
- rcc_set_rtc_clock_source
RTC on stm32/f0 can be clocked from the following three
sources: LSI, LSE (32.768Hz), HSE/32.
- rcc_enable_rtc_clock
- rcc_disable_rtc_clock
enable/disable clocking RTC module using selected clock source
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Add clock config for the 25MHz crystal found on the discovery board.
Verified to work on the STM32F7-Disco.
Reviewed-by: Karl Palsson <karlp@tweak.net.au>
Modified namespaces and types->structs to avoid namespace pollution as
was fixed for other families in:
3a7cbec7: stm32l/stm32f: name space standardization [BREAKING]
It was never complete, even for F1 family code, and went on to be even
less complete for f0 and f3. The usefulness of a library function to
check for both the irq being enabled _and_ the status flag is highly
questionable, and caused known user confusion.
The existing, much simpler, and fully functional usart_get_flag() is
a good replacement in almost all sane use cases.
Fixes https://github.com/libopencm3/libopencm3/issues/734
Simplified blocking API, with an async routine if you really need it.
Follows as best as I can understand the reference manual, but testing
those conditions will be difficult.
Tested with a Lora radio application that used three GPIO lines to send
different interrupts from the radio module to the L052. Tested with a
Jeenode Zero Rev1
While the NOLOAD variant sometimes worked with some toolchains, the
version in the generator scripts could never work, as neither the
startup code, nor gdb know how to load those sections properly.
Originally added in: eb18cc19cb392a69f8675c42776c644d1003ed89
The original scripts allowed you to place variables in eeprom space for
reading only. However, the last toolchain that generated working code
with this linker script was the gcc-arm-none-eabi-4_9-2014q4 release.
Subsequent releases treat the directives differently, and can lose track
of where variables are. One known symptom is constants getting bad
addresses, so for instance, "printf("asdfad")" will end up passing the
wrong address of the string constant into the eventual _write() call.
This commit removes the problematic directives until a more fully
correct system can be found that more properly follows the linker
script rules.
Attempts to helpfully unlock PECR when required in unlock_progmem and
unlock_option_bytes actually cause a bus error due to repeated unlocks,
as per ref manual and tedious experience. The better tested eeprom helper
routines unlock/lock in chunks, but that's not applicable for flash
writing.
Fixes: cf5fb002f6016242fb23b81fcbe98ee022bb84e9
SHCSR and DFSR are only implement on ARMv6 if the "Debug extension" is
implemented, but that's pretty much everywhere, so allow access to the
defines.
Signed-off-by: Karl Palsson <karlp@tweak.net.au>
Sometimes you're working on a subset of targets, and want to do full
clean/builds, but don't need to clean and rebuild families you're not
working with. This is a pure syntactic change that makes it easier to
simply comment out lines for targets, instead of having to mangle line
continuations.
Some parts used HSICLK, some used HSI. Most used NOCLK, f3 used
DISABLED. Try and move all to the shorter, simpler forms, instead of
having mixed defines for different targets for the same thing. Just
because the bits themselves are different doesn't mean we should make it
more difficult for users to port code.
MCOPRE prescaler definitions used a _SHIFT and a preshiftd definition.
The rest of the file uses separate _MASK and _SHIFT definitions.
Fix whitespace on the definitions while we're here.
Went awol merging something :(
(Yes, dwc_otg is theoretically shared with efm and co, but at present
it's still pretty much the stm32 version)
Fixes: 422d708384c76b8bf3a860bdd084e3010e28afa0
The previous implementation of copy_from_pm assumed the destination buffer
was aligned on a 16-bit boundary. On M0/M0+ cores (stm32F0*, stm32L0*)
this causes a hard fault.
This implementation is from Kuldeep Dhaka's tree; it does a 16-bit copy
only if the destination buffer is aligned, otherwise a bytewise copy.
Fixes GH issues #401, #461
