Early revisions of the reference manuals used different names for the
touch sense controller and firewall bits. These have now been changed
to be more in line with other families, and as these parts and bits were
new in this library, simply move forward to the current naming
convention.
According to reference manuals both l0 and l4 have "v2" i2c peripheral.
This patch adds i2c support to l0 and l4 using previously unified "v2" i2c
headers and implementation.
No real hardware has been tested so far. Only compilation tests for both
libopencm3 and libopencm3-examples for all stm32 families.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
The f1, f2, f4, l1 chip families have a similar "v1" i2c peripheral on board.
More recent f0, f3, l0, l3 chip families share another "v2" version of i2c.
This patch unifies headers and implementation for two types of i2c peripherals:
- rename: i2c_common_all.[ch] to i2c_common_v1.[ch]
- remove i2c_common_f24.h: extra I2C blocks are defined in specific headers
- use f3 i2c code as a basis for common "v2" i2c implementation
- add f0 i2c support: use "v2" i2c implementation
Tests:
- tested on a custom f0 board
- compile-tested both libopencm3 and libopencm3-examples for all stm32
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Add three more RTC clock helper functions:
- rcc_set_rtc_clock_source
RTC on stm32/f0 can be clocked from the following three
sources: LSI, LSE (32.768Hz), HSE/32.
- rcc_enable_rtc_clock
- rcc_disable_rtc_clock
enable/disable clocking RTC module using selected clock source
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Add clock config for the 25MHz crystal found on the discovery board.
Verified to work on the STM32F7-Disco.
Reviewed-by: Karl Palsson <karlp@tweak.net.au>
Modified namespaces and types->structs to avoid namespace pollution as
was fixed for other families in:
3a7cbec7: stm32l/stm32f: name space standardization [BREAKING]
It was never complete, even for F1 family code, and went on to be even
less complete for f0 and f3. The usefulness of a library function to
check for both the irq being enabled _and_ the status flag is highly
questionable, and caused known user confusion.
The existing, much simpler, and fully functional usart_get_flag() is
a good replacement in almost all sane use cases.
Fixes https://github.com/libopencm3/libopencm3/issues/734
Simplified blocking API, with an async routine if you really need it.
Follows as best as I can understand the reference manual, but testing
those conditions will be difficult.
Some parts used HSICLK, some used HSI. Most used NOCLK, f3 used
DISABLED. Try and move all to the shorter, simpler forms, instead of
having mixed defines for different targets for the same thing. Just
because the bits themselves are different doesn't mean we should make it
more difficult for users to port code.
MCOPRE prescaler definitions used a _SHIFT and a preshiftd definition.
The rest of the file uses separate _MASK and _SHIFT definitions.
Fix whitespace on the definitions while we're here.
The f107 ethernet peripheral is the same as in f4, and was pulled out
into lib/ethernet/mac_stm32fxx7.c in 52758bb8fdf065d46ef1ea21cc383e2dc74ee19b
This drops the duplicate code.
Fixes Github issue #694
The TSVREFE bit is defined to only be present on ADC1, so drop the
pointless adc argument. This has the added benefit of making the
API consistent with all other STM32 adc parts.
Use same names as adv-v2 peripheral uses. F1 is the only v1 peripheral
adc that has calibration modes at all.
Old:
adc_calibration(ADC1); // blocking call
New (blocking):
adc_calibrate(ADC1);
New (asynch):
adc_calibrate_async(ADC1);
// do stuff
adc_is_calibrating(ADC1); // false when calibration finished
Old routines are preserved but marked deprecated for now.
Extract the calibration code from the f0, and share it with the other
adc-v2 peripheral users (f0,l0,f3,l4)
Uses the same naming set of is/async naming conventions requested by the
RTOS guys instead of having blocking only calls.
Old code:
adc_calibrate_start(ADC);
adc_calibrate_wait_finish(ADC);
New code (blocking):
adc_calibrate(ADC);
New code (asynch):
adc_calibrate_async(ADC);
// do stuff
adc_is_calibrating(ADC); // will be false when it's finished.
Old code for f0 is still available, but marked deprecated.
Start providing async routines for all blocking routines, to make it
easier to use libopencm3 in some RTOS environments. This is not in
anyway intended to be complete, this just covers a single blocking
routine, rcc_wait_for_osc_ready. Documentation added to the top level,
and provided for all stm32 families.
This is common code for f0234, keep renaming files as has become standard, even
if it's a suboptimal solution. This doesn't rename the header which was not
renamed for f3.
Reported-by: https://github.com/gtoonstra
