Add object files to Makefile to include new modules into lib.
Correct typo in pwr.c
Add two new functions to timer.c to preset the counter (for use
with deadman style timeouts) and to identify an interrupt
source.
Also noticed lib/makefile.include didn't clean lib/stm32, which
isn't a target. Added a fix.
* simple polling of an injected channel
* timer triggered sampling of an injected channel
* timer triggered sampling and IRQ handling of an injected channel
* timer triggered sampling and IRQ handling of 4 injected channels
remove rcc_set_adc_clk - use rcc version
Added functions:
- adc_power_on
- adc_start_conversion_direct
- adc_set_dual_mode
- adc_eoc
- adc_eoc_injected
- adc_read_regular
- adc_read_injected
- adc_set_injected_offset
Tested dual mode scanned regular, but no tests of injected yet.
Changes: "discontinuous" was misspelled.
- adc_set_discontinuous_mode_regular - added "length" parameter
- adc_disable_discontinuous_mode_regular - name change
- adc_enable_discontinuous_mode_injected - name change
- adc_enable_automatic_injected_group_conversion - disable triggers
- adc_enable_jeoc_interrupt - name change to match common usage in lib
- adc_disable_jeoc_interrupt - ditto
- adc_enable_external_trigger_regular - remove incorrect test on parameter
- adc_enable_external_trigger_injected - ditto
- adc_set_sample_time - name change to match function's purpose
- adc_set_conversion_time_on_all_channels - ditto
- adc_set_injected_sequence - changed order of register loading (ref Barlow's issue)
- adc_enable_analog_watchdog_on_all_channels - flipped AWDSGL
- adc_enable_analog_watchdog_on_selected_channel - ditto
added aliases for expected commonly used functions to avoid sudden user code breakage
In adc.h, corrected errors in SQR names
added "deprecated" compiler warnings to adc_on and to aliases defined in adc.c
Adds libopencm3/cm3/assert.h header that provides assertion check macros
similar to those provided by the standard C library.
Thanks to Nicolas Schodet for help.
New doc directory with config files and generated html, LaTeX/pdf.
Makefile provided for autogeneration and explanatory README.
The project structure is hostile to doxygen, which can't cope with functions
of the same name. Doxygen is run for each family separately, and separately
for LaTeX generation. Customized layout files sort of "integrate" HTML, and
separate pdfs are generated for each family. Not ideal but seems the best
solution until doxygen changes, if at all.
That way, data source address does not depend on any other unrelated change in
linker script.
This also fixes cases when .data input section is aligned on 8 bytes. The new
version does not provide any address for the output section so that it is
aligned to the strictest input section. The _data_loadaddr symbol will
always take this alignment into account.
In adc.h additional defines needed to assist documentation - lines 172-191
added, and 384,436-451 are duplicates of earlier defines to complete
parameter sets (compiler has no trouble with these).
Minor doc corrections to other files.
No code changes (apart from additional defines).
file having its own group module rather than using @file.
No code changes except for the following:
gpio: Added function to map the eventout signal plus two Remap functions
dma: Prevent changing base addresses while channel enabled (see datasheet)
pwr: Added pwr.c (new file)
timer: Removed the last function that I introduced recently; there is already
an equivalent function present. Changed some parameter names for consistency.
