We don't support f0 yet so let's not fool anyone. We may rename those
files back again if when we cross check that it is actually true this
file supports f0.
- Several functions added (that only work on the f3)
- The data register now has a 8bit access counter part
that is necessary for 8bit transmissions, together with
the access functions.
- The init master functions doesn't work for the f3.
- Makefiles of other stm32s updated accordingly.
- f3/rcc.c updated to some definition changes.
- f3/flash.c removed in order to use flash_common_f234.c to comply with new organization.
- Makefiles now include building f3 src directory.
- Gpio support added. gpio_common_f24 changed to support also f3.
- f3 still not compiling, but f2 compile not broken (probably also f4).
Added --terse and --mailback options to the make stylecheck target. It
also does continue even if it enounters a possible error.
We decided on two exceptions from the linux kernel coding standard:
- Empty wait while loops may end with ; on the same line.
- All blocks after while, if, for have to be in brackets even if they
only contain one statement. Otherwise it is easy to introduce an
error.
Checkpatch needs to be adapted to reflect those changes.
Added hash processor register definitions and main functions. Hash
processor is supported in stm32f21, stm32f41 and stm32f43 and can be
used to calculate Md5 and Sha1.
Change flash_erase_sector (f2/f4) to take numerical sector argument.
As opposed to using one of the defines in the header, this is more convenient when programatically deciding which sectors to erase.
f1/timer.
Added timer_ic_set_polarity to timer_common_f24 with
the enum tim_ic_pol now including trigger on both edges.
Changed timer_slave_set_polarity to use enum tim_et_pol
rather than tim_ic_pol.
In response to suggestion of stinkydiver73 on 24 March that
timers in all families have an option for triggers on both
edges, except F1.
F2 and F4 have a common section to deal with the options register (TIM2 and TIM5 only)
L1 has been made common with timer_common_all as its options register has very different settings to F2/F4. Code is in the L1/timer.c L1/timer.h files
Note that F3 and F05 timers should fit into this scheme, with F3 having additional features.
Bundled with this is L1/pwr.h to change a documentation setting
Also all the Doxyfiles have added "ENABLE_PREPROCESSING = NO" to fix a problem introduced by commit 118.
(prevents inclusion and also issues warning)
Changes to some source files to remove references to common headers.
Changes to rng.h to make guard symbols the same in f2 and f4.
to remove errors, duplications and inconsistencies.
File lib/stm32/f1/pwr.c - all code removed as it duplicates that in common/pwr_common.c
Remaining changes do not affect code. Compiles OK.
TODO efm32 has no code so generates no modules
TODO F2 needs pwr.c
TODO L1 needs dma.h and dma.c
Clearing a single bit in DMA_CCR, then immediately writing a 0 over the
entire register is completely redundant on the F1, F3 and L1 DMA
peripherals. (Unlike the F2 & F4 DMA Peripheral, where this is
required)
Add the register definitions and some of the most basic helper functions
for the new style BCD RTC module found on the F2, F4, L1, F3 and F0.
This tries to keep as close to HACKING_COMMON_DOC as possible, while
maintaining sane names.
Code added for L1 to support the PWR Control block didn't properly
follow the HACKING_COMMON_DOC guidelines. The naming was wrong, and
some headers were missing. This commit has no functional changes, it
only addresses the style and structure problems.
